Will this work for an M-70 milled receiver ?

Coils said:

I'd think that barrel is standard AKM dimensions and the Yugo stuff would be to big for it, the chamber end would fit a trunnion or receiver though.

Can't answer the rest of your questions, if no one can help here, send them an email or call.

Click to expand...

Thanks Coils.
Way ahead of you though.
E-mail went out to them yesterday, and CarloC from Glocktalk was nice enough to provide me with some information on Yugo barrel dimensions.

Here's milled M-70 Yugo data:
Rear Sight Base: .723"
Handguard retainer: .684
Gas Block: .628"
Front Sight Base: .587"

M-64 data:
Rear Sight Base: .722"
Handguard retainer: .682"
Gas Block: .624"
Front Sight Base: .586"

Yugo AKM data:
Rear Sight Base: .730"
Handguard Retainer: .687"
Gas Block: .630"
Front Sight Base: .593"

Here is some standard AK-47 data:
Rear sight base: .723"
Handguard retainer: .682"
Gas block: .624"
FSB: .585"

And some AKM data (not including Chinese):
Rear sight base: .692"
Handguard retainer: .670"
Gas Block: .593"
FSB: .574"

Click to expand...

Mine appears to be a milled Yugo AKM with dimensions of :
Receiver= .910
Rear Sight= .730
Handguard retainer= .688
Gas Block= .631
Front Sight= .591

I have also sent them (Green Mountain) the distance for the handguard retainer cut on my barrel as their picture appears to have one already cut.
I will update this thread with their reply.

I have received my new barrel from Green Mountain barrels today.
It is an EXACT match for the barrel I pulled from my milled receiver Yugo M70.
Here's the dimensions as I measured them from both barrels:
Receiver= .906
RSB=.728
Handguard retainer=.688
Gas Block=.631
FSB=.591

Some pictures of the new (chrome lined) GM barrel next to the pulled barrel from my rifle>>>
(the end of the old barrel has been cut shorter for re-crowning, and the new still has a protective cap on the threads)





I recommend talking with Dennis at Green Mountain Barrels as his customer service is fantastic.